2 Person Picnic Table Woodworking Pattern

Enjoy outdoor dining with a friend on this attractive cedar project that is easily made from our simple to follow full-size pattern. (Dimensions: Table top 35″, Seats 11″ Deep X 18″ Wide)

More Info

Description:
Attractive two person picnic table. Makes a nice weekend project.

Dimensions:
Table top 35″

Wood:
Weather resistant Cedar. If you don’t need weather resistant wood for your project use a lower cost #2 grade pine.
Three 2X6 x 10′ long board
Four 2X4 x 10′ long boards
One 2X6 x 8′ long board
One 4X4 x 6′ long board

Hardware: Required for assembly
Screws
* One Hundred Sixteen #8 x 2-1/2″ long flat head, weather resistant
* Eighty Two #10 x 3″ long, flat head weather resistant
* Lag Screw Eight 5/16″ dia. x 3″ long
* Washer Eight 1″ O.D. x 5/16″ I.D.

Tools:
Table saw or circular saw
Drill
Drill bits 3/16″, 5/16″ and 7/16″ dia.

Supplies:
Transfer paper (#CARB2)
Pencil and clear tape
Sand paper Medium and fine grits
Wood Filler Non-shrinking, fast drying for wood flaws
Paint brushes 3/4″ and 1/4″ wide brushes
Wood Glue waterproof, exterior grade

Sealer:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.

NOTE: Not recommended to be used by persons weighing in excess of 250 lbs. each.